Motorola CAJUN P120 - Manual (Page 120)

106 Cajun P120 User’s Guide
Lucent Approved GBIC Transceivers
Caution: All Lucent appoved GBICs are 5V. Do not insert a 3.3V GBIC.
Lucent supplies the following two GBIC transceivers for the Cajun P120 X120G2
Expansion Sub-modules. You can order these directly from your local Lucent
representative using the PEC or COM Codes:
In addition, Lucent has tested and approved a number of GBIC transceivers from
other manufacturers for use with the Cajun X120G2 Expansion sub-module. An
up-to-date list can be found in Lucent Networks’ World-Wide Web site at the
following address:
http://www.lucentnetworks.com/ Click on the “Supported
Devices” icon.
Specifications
X120G2- LX GBIC Transceiver
A 9
µ
m or 10
µ
m single-mode fiber (SMF) cable may be connected to a
1000Base-LX GBIC port. The maximum length is 10 km (32,808 ft).
A 50
µ
m or 62.5
µ
m multimode (MMF) fiber cable may be connected to a
1000Base-LX GBIC port. The maximum length is 550 m (1,804 ft.) for 50
µ
m and
62.5
µ
m cable.
The LX transceiver has a Wavelength of 1300 nm, Transmission Rate of 1.25 Gbps
and Input Power of 5V.
X120G2- SX GBIC Transceiver
A 50
µ
m or 62.5
µ
m multimode (MMF) fiber cable may be connected to a
1000Base-SX GBIC port. The maximum length is 500 m (1,640 ft.) for 50
µ
m cable
and 220 m (722 ft.) for 62.5
µ
m cable.
The SX transceiver has a Wavelength of 850 nm, Transmission Rate of 1.25 Gbps
and Input Power of 5V.
Type Description PEC Code COM Code
GBIC SX
Transceiver Multimode Fiber
1000BaseSx (550 m) 4705-122 108659228
GBIC LX
Transceiver Single-mode Fiber
1000BaseLx (10 km) 4705-121 108659210