Show image version command, Show snmp command, Show image version command show snmp command – Motorola CAJUN P120 User Manual
Page 89
Chapter 7
Cajun Campus CLI (Command Line Interface)
Cajun P120 User’s Guide
75
Show Image Version Command
Use the
show image version
command to display the software version of the
image on both Banks of the Cajun P120.
The syntax for this command is:
show image version [slot_num]
Example:
Console> show image version
Show SNMP Command
Use the
show snmp
command to display SNMP information.
The syntax for this command is:
show snmp
Example:
Console> show snmp
Console>
slot_num
Module number (always 1)
Mod
-------
Module-Type
----------------
Bank
-------
Version
----------
1
CajunP120 Base
A
2.5.7
B
2.0.8
Community-Access
----------------
Community-String
----------------
read-only
public
read-write
private
trap
public
Trap-Rec-Address
----------------
Traps Enabled
-----------------
192.122.173.42
all
0.0.0.0
all
192.122.178.44
all