Configuring the cajun p120 tftp parameters, Start the software download, Reset the cajun p120 – Motorola CAJUN P120 User Manual
Page 126
112
Cajun P120 User’s Guide
Configuring the Cajun P120 TFTP parameters
To configure the Cajun P120 TFTP parameters:
1
Establish a Telnet session with the Cajun P120 (“Establishing a Telnet Session
(Ethernet port or modem)” on page 26 for details).
2
Log in to the Privileged level as follows:
a
Type login at the C
ajunP120>
prompt.
b
Enter the password (the default value is lucent):
Enter password: lucent
The prompt should change to CajunP120-priv#.
3
Enter the TFTP configuration mode by typing the following:
CajunP120-priv#set TFTP
4
Type list at the
TFTP>
prompt
5
You will be asked to enter the TFTP parameters one by one as follows (for a
detailed explanation of the parameters, refer to “TFTP Configuration Group
(TFTP)” on page 64):
tftp>tftp-op [limited]? Ensure that the value is set to “limited”
tftp>tftp-ip [149.49.42.58 ]? Enter the IP address of the TFTP server.
tftp>tftp-filename [c:\p120\p120.lst ]? Enter the name of the lst file which you
prepared in the previous step, including the full path
(e.g., c:\p120\p120.lst).
6
Once you have entered all the parameters, the
CajunP120-priv#
prompt will be
displayed. Type WRITE to save the parameters. The following message will
appear on the display:
Writes this configuration into the memory. Dynamic parameters will take affect
immediately. All other parameters will only take affect after powering the switch
off/on.
Save the new configuration (y/n)
?
Enter
Y
to save the new configuration.
Start the Software Download
Now that the Cajun P120 is configured, you can start the download procedure:
1
Run the TFTP server on the computer with the Cajun P120 files.
2
Type the command
tftp-cmd start
at the CLI prompt. This starts the
download.
3
If you wish, you can monitor the download status by typing the command
status
at the CLI prompt.
Once the download has finished, you should receive the following message:
FTP transfer has finished successfully
Reset the Cajun P120
In order to complete the download process, you need to reset the Cajun P120
before proceeding.