Motorola CAJUN P120 - Manual (Page 77)

Chapter 6 Legacy CLI (Command Line Interface)
Cajun P120 User’s Guide 63
Agent VLAN Group (VLAN)
This group includes parameters for the configuration of the Agent VLAN. The table
below displays the parameters, a description of the parameters, the default values,
and the valid range of values.
To view or change these parameters, type the command:
set|show vlan list
at the prompt.
Note: The Agent VLAN must be the same as the Management Station VLAN.
Port Mirroring Group (COPY-PORT)
This group includes parameters for the configuration of the destination port (the
port to which you wish to connect the network analyzer) and source port (the port
that you want to analyze/monitor). The table below displays the parameters, a
description of the parameters, the default values, and the valid range of values.
The syntax for this command is:
set|show copy-port
Table 6.13 VLAN Group Parameters
Parameter Description
Default
Value(s) Valid Range for
Values
MNGVLAN # Defines the VLAN of
the Cajun P120 agent VLAN 1 1-3071 (1-255 in S/W
Version 1.0)
Table 6.14 COPY-PORT Group Parameters
Parameter Description
Default
Value(s) Valid Range
for Values
DEST-PORT Destination port none 1-40, none
SOURCE-PORT Source port none 1-40, none
DEST-PORT Port to be connected to an external probe/network analyzer.
SOURCE-PORT The port that will be mirrored to the destination port.