Motorola CAJUN P120 - Manual (Page 52)

Chapter 6 Legacy CLI (Command Line Interface)
38 Cajun P120 User’s Guide
Command Syntax
The CLI may display error messages if it encounters a problem. For details see the
Section “Error Messages” on Page 66.
Command Abbreviations
All commands and parameters in the CLI can be truncated to an abbreviation of 4
characters or less, as long as the abbreviation is not ambiguous. For example,
revision can be abbreviated revi .
For ambiguous commands, type the beginning letters on the command line and
then use the Tab key to toggle through all the possible commands beginning with
these letters.
Command Line Prompt
The default prompt for the Privileged level is Cajun P120# , however you may
change Cajun P120 to the text of your choice using the prompt command.
However, once you enter a group of parameters, the prompt will indicate which
group you are in (
group> ). For example, if you are in the IP group then the
prompt appears as ip> .
While in a group, all commands that you enter will be performed on this group
only. For example,
ip> show will only display the current settings for the IP
group.
If you have entered an index value for the group then it will also be indicated at the
prompt. For example,
CajunP120-priv# set P120 will display the P120>
prompt.
To exit a group and return to the CajunP120> or CajunP120-priv# prompt,
press Ctrl-Q.