Motorola CAJUN P120 User Manual
Page 54
Chapter 6
Legacy CLI (Command Line Interface)
40
Cajun P120 User’s Guide
Ping
Pings the IP address; default is four times
Use the Ctrl+Q command to stop the pinging.
revision
Displays revision information for the various
components.
rnds [on|off]
This is reserved for technical personnel only.
service
This is reserved for technical personnel only.
show
Example: show ip
Displays the current configuration settings for
a specific group or port. If you have made any
changes using the CLI, they are listed in a
column on the left (administration) and the
current operational configuration is in a
column on the right.
shLAG
Shows all ports that are assigned to a link
aggregation group.
shport
Display a table of all ports.
simple-setup
This command is only available in
Normal level.
For the configuration of the initial parameters
needed for the Cajun P120, including its IP
address.
vlantab
Displays a table with VLAN assignments of
ports.
Table 6.1
Normal Level Commands (Continued)
Command Syntax
Function