Set license command, Set snmp community command, Set license command set snmp community command – Motorola CAJUN P120 User Manual
Page 102
Chapter 7
Cajun Campus CLI (Command Line Interface)
88
Cajun P120 User’s Guide
Set License Command
Use the
set license
command to install an application Software License.
The syntax for this command is:
set license
Example:
Console> set license XXXX XXXX XXXX XXXX XXXX XXXX
Set SNMP Community Command
Use the
set snmp community
command to set SNMP communities and
associated access types.
There are two configurable SNMP communities, one for each access type.
The syntax for this command is:
set snmp community
The default configuration has the following communities and access types defined:
public---read-only
public---read-write
Example:
To set read-write access to the SNMP community called apple:
Console>(enable) set snmp community read-write apple
SNMP read-write community string set.
Console>(enable)
Application
------------
License Key
------------------------------------
SMON
XXXX XXXX XXXX XXXX XXXX XXXX
read-only|trap
Assign read-only and trap access to the specified SNMP
community.
read-write
Assign read-write access to the specified SNMP
community.
community_string
(Optional) Name of the SNMP community.