Set vlan command – Motorola CAJUN P120 User Manual
Page 109
Chapter 7
Cajun Campus CLI (Command Line Interface)
Cajun P120 User’s Guide
95
Set Vlan Command
Use the
set vlan
command to set the Port-VLANs. If adding a new VLAN, the
VLAN number must be within the range 1 to 3071.
The syntax for this command is:
set vlan vlan_num slot_num/port_num
Example:
To set VLAN 850 to include port 3 on module 1.
Console>(enable) set vlan 850 1/3
Console>(enable)
vlan_num
Number identifying the VLAN
slot_num
Module number (always 1)
port_list
Port number on the module belonging to the VLAN