Freescale Semiconductor ColdFire MCF52210 - Manual (Page 74)

ColdFire Core
MCF52211 ColdFire® Integrated Microcontroller Reference Manual, Rev. 2
3-30 Freescale Semiconductor
3.3.5.6 MAC Instruction Execution Times
WDEBUG — 5(2/0) — — 5(2/0) — — —
1 The n is the number of registers moved by the MOVEM opcode.
2
If a MOVE.W #imm,SR instruction is executed and imm[13] equals 1, the execution time is 1(0/0).
3
The execution time for STOP is the time required until the processor begins sampling continuously for interrupts.
4 PEA execution times are the same for (d16,PC).
5 PEA execution times are the same for (d8,PC,Xn*SF).
Table 3-17. MAC Instruction Execution Times
Opcode
Effective Address
Rn (An) (An)+ -(An) (d16,An)
(d8,An,
Xn*SF)
xxx.wl #xxx
MAC.L Ry, Rx 3(0/0) — — — — — — —
MAC.L Ry, Rx, , Rw — 4(1/0) 4(1/0) 4(1/0) 4(1/0) 1 — — —
MAC.W Ry, Rx 1(0/0) — — — — — — —
MAC.W Ry, Rx, , Rw — 2(1/0) 2(1/0) 2(1/0) 2(1/0) 1
1
Effective address of (d16,PC) not supported
— — —
MOVE.L y, Racc 1(0/0) — — — — — — 1(0/0)
MOVE.L y, MACSR 2(0/0) — — — — — — 2(0/0)
MOVE.L y, Rmask 1(0/0) — — — — — — 1(0/0)
MOVE.L Racc,x 1(0/0)
2
2 Storing the accumulator requires one additional processor clock cycle when rounding is performed
— — — — — — —
MOVE.L MACSR,x 1(0/0) — — — — — — —
MOVE.L Rmask, x 1(0/0) — — — — — — —
MSAC.L Ry, Rx 3(0/0) — — — — — — —
MSAC.W Ry, Rx 1(0/0) — — — — — — —
MSAC.L Ry, Rx, , Rw — 4(1/0) 4(1/0) 4(1/0) 4(1/0)
1
— — —
MSAC.W Ry, Rx, , Rw — 2(1/0) 2(1/0) 2(1/0) 2(1/0)
1
— — —
MULS.L y, Dx 5(0/0) 7(1/0) 7(1/0) 7(1/0) 7(1/0) — — —
MULS.W y, Dx 3(0/0) 5(1/0) 5(1/0) 5(1/0) 5(1/0) 6(1/0) 5(1/0) 3(0/0)
MULU.L y, Dx 5(0/0) 7(1/0) 7(1/0) 7(1/0) 7(1/0) — — —
MULU.W y, Dx 3(0/0) 5(1/0) 5(1/0) 5(1/0) 5(1/0) 6(1/0) 5(1/0) 3(0/0)
Table 3-16. Miscellaneous Instruction Execution Times (continued)
Opcode
Effective Address
Rn (An) (An)+ -(An) (d16,An) (d8,An,Xn*SF) xxx.wl #xxx