FARGO electronic HDP600-LC CR100 - Manual (Page 388)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 11-28
Adjusting the Lamination Flipper Offset
Step Procedure
1 Select MENU, Setup Printer and Flipper Offset or Inverted Offset.
2 Change the setting in small increments if the card is not feeding or Flipping
correctly. (Note: A negative adjustment will lower the side of the Flipper Table
closest to the Exit Hopper.)
3 Press the Save button to save the value.