FARGO electronic HDP600-LC CR100 - Manual (Page 204)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 5-8
Reviewing the Telnet Command Table (continued)
Telnet Command Command Purpose Command Format
contact Set the contact string. set sysinfo contact []
location Set the location string. set sysinfo location []
label Set the label string. set sysinfo label []
sysinfo
from Set all strings from
default or current
settings. set sysinfo from default|current
name Change the name of a
system log path set syslog name
type Change the type of a
system log path. This
starts or stops logging
on start of jobs or on
faults. set syslog type
[[-]job] [[-]pfault]
dest Change the destination
of a system log path.
This may be set to
none, e-mail, udp or
tcp. set syslog dest
none|email|udp|tcp
email Change the e-mail
address for e-mail
notification for a
system log path. It
must specify a valid e-
mail address. set syslog email
udp Specify the IP address
of the UPD system
logging program. set syslog udp
set
syslog
from Restore system log
path settings from the
default or current
settings. set syslog from default|current