FARGO electronic HDP600-LC CR100 - Manual (Page 302)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 7-36
Using the Print Back Side Only option
Use this option to print only onto the backside of cards.
Step Procedure
1 Select this option to print only onto the backside of preprinted cards that must
have their Magnetic Stripe or smart card chip encoded. (Note: Load the
cards in the usual fashion.)
• When this option is selected, the Print Both Sides option is
automatically disabled.)
• When attempting to print a two-page document (if Print Back Side Only
is selected), the first page of the document will print on the backside of
the card.
• The second page of the document will then be printed on the back of a
second card.