FARGO electronic HDP600-LC CR100 - Manual (Page 18)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 1-9
Reviewing the Lamination Module Boot up Sequence
Step Process
1 The Lamination Headlift turns until the head up position is returned from Headlift
Sensor.
2 The Lamination Ribbon Motor activates to determine the presence of a roll of
lamination.
3 The Lamination Flipper table homes itself.
4 The Card Sensor checks for the presence of a card and ejects it if found.