FARGO electronic HDP600-LC CR100 - Manual (Page 256)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 5-60
Reviewing Frequently-asked Questions (continued)
Question Answer
Can I use Fargo IP-Tracer
to locate Printers on a
different network segment? No. The IP-Tracer can only locate Fargo-compatible
Printers located in the same network segment (as the PC
running IP-Tracer).
How do I upgrade the
Printer Firmware in my
Ethernet-enabled Printer? This is done in the same manner as a USB-connected
Printer. The PC doing the upgrade must have a Driver
installed for the Fargo Printer to be upgraded.
Follow this procedure.
1. Run the Fargo Diagnostic Utility from the start menu:
Go to the Start -> Programs -> Fargo -> Fargo
Diagnostic Utility.
2. Select the Fargo Printer to upgrade from the drop-
down box.
3. Go to the Firmware Updates tab.
4. If you need to download the update file from the
Internet, select the Download Firmware button.
5. Choose the update file with the Select Firmware
button.
6. Put your Printer into the upgrade mode. See the
instructions for your specific Fargo Printer.
7. Select the Send Firmware button.
How do I upgrade the Print
Server Firmware for my
Printer? See Upgrading the Print Server .
What is the default User
name and password for
the Printer? The default passwords are blank (i.e., an empty string).
• The default Users are as follows: root as the
administrative User and guest as a non-administrative
User.
• The Printer supports four (4) Users.