FARGO electronic HDP600-LC CR100 - Manual (Page 386)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 11-26
Setting the Magnetic TOF
Step Procedure
7 Press Save to save the value.
8 Test the position of the Start Sentinel by magnetically encoding a card and
checking as described in Step 1 in this same procedure.
9 Repeat Steps 1 to 6 until the Magnetic TOF is correct.
Magnetic Track Data
.293“ / 7.44mm
Trailing Edge
of Card
Leading Edge
of Card
- +