Using the encoding mode option (continued) – FARGO electronic HDP600-LC CR100 User Manual

Page 327

Text mode
Original mode

RESTRICTED USE ONLY

Fargo Electronics, Inc.

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)

7-61

Using the Encoding Mode option (continued)

Step Procedure

Select the ISO Standard Encoding Module with a dual-coercivity (high or low)
encoding head. (Note: By default, the Printer Driver is set to encode according
to ISO standards onto high-coercivity Magnetic Stripes.)

Select the JIS II Standard Encoding Module commonly used in Japan. Select
the JIS II mode to encode only Track 2.

(Note #1: The JIS II option provides encoding compatibility with the JIS C
6220 Type II cards commonly used in Japan. No encoding customization
options are available with the JIS II mode.)

(Note #2: A JIS II Magnetic Head must be installed in the Printer to use any of
the JIS II options in the Driver.)