Resolving a headlift motor or sensor error, Resolving a headlift motor or sensor error -65 – FARGO electronic HDP600-LC CR100 User Manual

Page 165

RESTRICTED USE ONLY

Fargo Electronics, Inc.

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)

4-65

Resolving a Headlift Motor or Sensor Error

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.

Step Procedure

Review the following information.

• Symptom: The Printhead continuously cycles or does not cycle at all

• Printer Error State: Headlift Sensor is not detecting movement from the

Headlift Cam.

• LCD Error Display: Headlift Error

• Driver Monitor Error Display: General Error

2 Press

the

Cancel Print button on the Driver Monitor Error Display Message.