FARGO electronic HDP600-LC CR100 - Manual (Page 37)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 2-19
Printer Components: LCD and Softkey Control Pad (continued)
Component Description
The Pause
button Use this button to pause the Printer at any time during operation. Note
the Printer will always finish its current task before pausing.
When the Printer is paused, the LED Light will flash and the Pause
softkey button will change to Resume.
Press Resume to continue Printer operation.
The LED Light This light works in conjunction with the Printer's LCD Display to help
communicate the Printer's current status. It is especially effective when
you are too far away from the Printer to read the LCD Display. The
following explains how to interpret both LED Lights on the exterior of
the Printer.
• Off: Indicates the Printer power is OFF.
• Solid GREEN: Indicates the Printer is powered ON and ready for
operation.
• Flashing GREEN: Indicates a Printer ERROR or ATTENTION
condition. Refer to the Printer's LCD Display for information.