Adjusting for the resin dither, Adjusting for the resin dither -32 – FARGO electronic HDP600-LC CR100 User Manual

Page 298

Text mode
Original mode

RESTRICTED USE ONLY

Fargo Electronics, Inc.

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)

7-32

Adjusting for the Resin Dither

Select the appropriate dither method according to the type of image to be printed. (Note:
This option only affects those objects printed on the backside of a card with the resin black
Panel of a YMCK or YMCKK Print Ribbon.)

Step Procedure

1 Select

Optimized for Photo when printing photo quality images with resin.

Select Optimized for Graphics when printing lower quality images (e.g.,
clipart, logos, etc.) with resin.