FARGO electronic HDP600-LC CR100 - Manual (Page 140)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 4-40
Resolving a Flipper Jam Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: The Flipper Table Module is jamming.
• Printer Error State: The Flipper Table has jammed while either
aligning itself or flipping a card.
• LCD Error Display: Flipper Jam
• Driver Monitor Error Display: Flipper Jam