FARGO electronic M30e User Manual

FARGO electronic Printers

Table of contents

Supported Linux Distributions
- Ubuntu 7.10
- Fedora Core 8
- Fedora Core 7
- Red Hat Enterprise 5
- openSuse 10.3
Installation Procedures
- Installing the CUPS Driver
- Adding a USB Printer
- Example output from lshal
- Reviewing the File Listing
Printing a Sample Card
- Entering the Print Only Command
- Entering the Print with Mag Encoding Command
Printer Maintenance
- Performing a Ribbon Sensor Calibration
- Cleaning the Printer
- Printing a Test Card
Driver Options
- Using the Device Options
  - Selecting the Card Size
  - Selecting the Ribbon Types
  - Selecting the Disable Printing Option
  - Selecting the Print Both Sides Option
  - Selecting the Resin Dither Options
- Print and Overlay Options
  - Reviewing the Front Print Area
    - Reviewing the Front Print Area
  - Reviewing the Back Print Area
  - Reviewing the Back Print Area (Examples)
- Magnetic Encoding Options
  - Setting the Encoding Mode
  - Setting the Coercivity
- Sending ISO Magnetic Encoding Information
- Sending JIS II Magnetic Encoding Information
- Sending RAW Magnetic Encoding Information
- Reviewing the URL Encoding Reference
- Reviewing the ASCII Code and Character Table
- Using the Image Color Capabilities
  - Following the Dye-Sub Intensity Procedure
  - Following the Resin Heat Front Procedure
  - Following the Resin Heat Back Procedure
  - Following the Overlay Heat Procedure
- Using the Image Position Function
  - Selecting the Horizontal Option
  - Selecting the Vertical Option