Upgrading the print server, Upgrading the print server -42 – FARGO electronic HDP600-LC CR100 User Manual
Page 238
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
5-42
Upgrading the Print Server
This procedure provides a means to upgrade the Firmware in the Printer Server not the main
Printer.
Step Procedure
1 Select
the
Administration link.
2
Log in as a root User (using the old password) if you are so prompted. (Note:
Any change of setting will only be accepted after you have successfully logged
in.)
3 Select
the
Upgrade link.
4 Select
the
Browse button.
5
Navigate to and select the appropriate file to upload.