FARGO electronic HDP600-LC CR100 - Manual (Page 158)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 4-58
Resolving a Ribbon Out Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: Printer will not print.
• Printer Error State: The Ribbon Sensor has detected the End Of
Ribbon mark
• LCD Error Display: Ribbon Out
• Driver Monitor Error Display: Ribbon Out
2 Replace the Ribbon
a. Press on the Resume button.