FARGO electronic HDP600-LC CR100 - Manual (Page 145)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 4-45
Resolving a No Magnetic Encoder Installed Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: There is no Magnetic Encoder installed.
• Printer Error State: A print job with Magnetic encoding was sent with
no Magnetic encoder installed in the Printer.
• LCD Error Display: No Magnetic Encoder Installed
• Driver Monitor Error Display: No Magnetic Encoder Installed