Datacard Group SP Series - Manual (Page 98)

C-5
User’s Guide for Express™ and Select™ Class Printers
Set the serial port on Windows NT
1 From the Start menu, select Settings and then Control Panel.
2 From the Control Panel, select Ports.
3 From the Ports dialog box, select the port, such as COM1 or COM2 ( Figure C-2 ).
Figure C-2: Ports dialog box
4 Select the Settings button to display the port settings.
If the PC has more than one serial port, make sure you view the settings for
the serial port to which the printer is attached.
Figure C-3: Settings dialog box
5 Select the following settings:
Setting Value
Baud rate 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
i