Datacard Group SP Series - Manual (Page 55)

User’s Guide for Express™ and Select™ Printers
5
5
Advanced Information
This chapter describes advanced tasks you might perform
using the printer driver. To perform the procedures in this
chapter, you should know how to use the printer to print cards
and be comfortable using the Windows NT or Windows 95/98
operating system. It describes:
•
How to reinstall the printer driver
•
How to install two printers on one PC
•
How to print over a network
•
The operational settings in the printer that you can change
Reinstalling the printer driver
Obtain the most current Express or Select Class printer driver from the Datacard Web
site at www.datacard.com. You can also request the current driver from your
Datacard-authorized representative. Be sure to obtain the correct printer driver for
your operating system--Microsoft Windows 95/98 or Windows NT.
To install a second printer driver of the same class on a PC running Windows 95/
98, see
“Installing two printers (Windows 95/98)” on page 5-5 . (You cannot install
a second printer driver on a PC running Windows NT.) Do not install two printer
drivers unless you have connected two printers to the PC.
Remove the existing printer driver
Follow these steps for Windows NT and Windows 95/98.
Remove the existing printer driver
Make sure that all jobs have been printed or have been deleted from the print
spooler before removing the existing driver. See Windows help to use the print
spooler.
1 Close all applications. Do not close Windows.
2 Select Settings and then Printers from the Windows Start menu. The Printers
window appears.
3 In the Printers window, click once on the printer icon to select it. The icon has the
name chosen during printer driver installation.
4 Press the Delete key.
i
i