Environmental requirements, Unpacking the printer, Environmental requirements -3 – Datacard Group SP Series User Manual
Page 17: Unpacking the printer -3, Unpack the printer
Getting started
2-3
User’s Guide for Express™ and Select™ Class Printers
Environmental requirements
The Express or Select printer requires the following environmental conditions for
optimal operation:
•
Operating relative humidity: 20% to 80% non-condensing
•
Operating temperature range: 55° F to 80° F (13° C to 27° C)
If you store the Express or Select printer, provide an environment with the following
conditions:
•
Storage relative humidity: 20% to 80% non-condensing
•
Storage temperature range: 0° F to 100° F (-17.8° C to 37.8° C)
Unpacking the printer
Follow these steps to unpack the printer. Be sure to select a location that meets the
site requirements for the Express or Select printer. See
for more information.
You need scissors or another cutting device to unpack the printer.
Make sure you have one or more people to assist with unpacking the printer. One or
two people can lift the printer while another person assists with removing packaging.
Unpack the printer
1
Place the shipping carton on a firm level surface.
2
Use a scissors to open the taped area on top of the shipping carton.
3
Open the shipping carton (step 1 in
Figure 2-1
).
Figure 2-1: Unpack the printer
i
4
1
1
3
2