Print the windows test page – Datacard Group SP Series User Manual
Page 31
Getting started
2-17
User’s Guide for Express™ and Select™ Class Printers
See
“Magnetic stripe encoding” on page D-1
for more information about magnetic
stripe tracks.
•
The tracks available depend on the type of module installed.
If you are not satisfied with the appearance of the test card, see
to identify the problem and possible solutions.
Follow these steps to print a Windows test page on both the Windows NT 4.0 and
Windows 98 operating systems.
Print the Windows test page
The Express or Select printer must be connected to the PC with the driver
installed, and both printer and PC must be running.
1
Select Start from the Windows taskbar.
2
Select Settings and then Printers from the Windows Start menu. The Printers
window appears.
3
Click once on the Express or Select printer icon.
4
Select File from the Printers menu bar, and then select Properties. The Express or
Select Properties dialog box appears.
5
Select the Print Test Page button on the General tab. The card should print.
6
Remove the card from the card output stacker.
The card should look similar to the cards shown in
Figure 2-14
and
. If
it does not print, see
Figure 2-14: Windows test page, portrait orientation
i
E
win98tp
&RQJUDWXODW
,I \RX FDQ
UHDG WKLV
LQIRUPDWLRQ
\RX KDYH
:LQGRZV
Microsoft
9 8