Supply roll storage, Cards, Card specifications – Datacard Group SP Series User Manual
Page 85: Supply roll storage” on
B-2
User’s Guide for Express™ and Select™ Printers
When you use a monochrome print ribbon, use a printhead designed for optimal
monochrome printing. See
“Printhead cartridge” on page B-7
for more information.
If you change the type of ribbon you use, be sure to make the appropriate changes to
the Express or Select printer driver. See
“Changing the type of print ribbon” on
Supply roll storage
Follow these guidelines when storing supply rolls:
•
The print ribbon maintains its quality for about a year. For optimal card quality,
purchase and store quantities that you can use up in less than a year.
•
The print ribbon and card stock might require secure storage and tracking. Follow
your policy for storing and tracking the supplies used to make cards.
•
Select a location away from direct sunlight, with a temperature between 55° F and
80° F or between 13° C and 27° C. A humidity range from 20% to 80% (non-
condensing) is recommended.
•
Supply rolls should be at room temperature when they are installed in the printer
and used. If supplies are stored in a cooler environment than the printer, allow
supplies to reach room temperature before using.
Cards
This section describes specifications and quality guidelines for card stock to use with
the Express or Select printer. It also describes the environmental specifications for
storage of card stock.
Card specifications
For best results with the Express or Select printer, use high-quality card stock that
meets the specifications and recommendations described in this section.
K dark blue 596230-002
Continuous dark blue
Blue
Not applicable
K white
#
596230-003
Continuous white
White
Not applicable
K red
596230-004
Continuous red
Red
Not applicable
K green
596230-006
Continuous green
Green
Not applicable
K silver
596230-007
Continuous silver
Silver
Not applicable
K scratch-
off
548237-001
Continuous scratch-off panel
Scratch-off
Not applicable
#.
Print ribbon is larger than printer capacity. Remove 7 yards (6.5 m) of ribbon before
loading this roll in the printer.
Ribbon
type
Part
number
Panel description
Colors
One panel set
prints:
i
i