Setting a smart card serial port—windows nt, Set printer permissions – Datacard Group SP Series User Manual
Page 97
C-4
User’s Guide for Express™ and Select™ Class Printers
•
Allow users to use all features of the printer and driver, including messages.
(Messages inform users when they need to change the ribbon, load cards, and fix
problems.)
•
Prevent any access to the printer by unauthorized users.
Set printer permissions
1
From the Windows NT taskbar select Start, then Settings, and then Printers. The
Printers window appears.
2
Highlight the Express or Select printer driver icon by clicking on it once.
3
From the menu bar, select File and then Properties. The Properties window for
the Express or Select printer appears.
4
Select the Security tab.
5
Click the Permissions button to open the Printer Permissions dialog box.
6
Select the Add button to open the Add Users and Groups dialog box.
7
Select the Show Users button.
8
Select the name of the user (or group) to add to the printer and click the Add
button.
9
From the Type of Access list, select the access:
–
For a user of the Express or Select printer on the PC connected to the printer,
select Full Control. The user will be able to see all messages. The user will
also be able to perform other actions, such as deleting the printer driver.
–
For a user who accesses the printer over a network, select Print.
10 Select OK to save the change and close the Add Users and Groups window.
11 Repeat steps 6 through 10 to add other users or groups.
12 Select OK to save the changes and close the Printer Permissions window.
13 Select OK to close the Properties dialog box.
♦
Setting a smart card serial port—Windows NT
If you use a smart card application, you connect the PC to the serial port on the
Express or Select printer. The PC should be set to match the printer serial port
settings. This section describes how to set the PC serial port in the Windows NT 4.0
operating system. These settings apply to ports for both a contact smart card module
and a contactless smart card module. If you use a contact station with the printer, see
the information for the contact station for port settings.