Datacard Group SP Series User Manual
Page 54
4-10
Maintaining the printer
User’s Guide for Express™ and Select™ Class Printers
Be sure that the tabs on the back of the printhead cartridge fit into the notches on
the swing arm spring bar securely (location A in
). Release the latch
lever when the printhead cartridge is in place.
5
Clean the printhead. See
“Clean the printhead” on page 4-7
.
6
Close the swing arm, pressing it down until the push latch clicks into place.
7
Gently pull the excess printhead cartridge cable out of the top of the swing arm.
8
Remove the ESD strap.
9
Close the cover.
10 Power on the printer.
11 Print a card to verify the quality of printing. You can print a Windows test page or a
card using your card creation application. If card quality is still inadequate, see
.
♦