Hale 5.0 FoamLogix - Manual (Page 72)

ΙΙ
-42
ROTARY GEAR PUMP
ELECTRONIC FOAM PROPORTIONING SYSTEM
Section
II
: Installation
cutout and secure to panel using the
#10-24 UNC x ½ inch long screws and
#10-24 UNC nuts provided.
NOTE: When making cable connection
make sure the cable is routed by the
shortest most direct route. A maximum
of 40 feet (12 meters) of remote cable
may be used.
4. Connect the remote activation
switch cable from the connector on the
control unit (see figure 2-24) to the
connector on the back of the remote
activation switch.