Hale 5.0 FoamLogix - Manual (Page 11)

Ι
-5
ROTARY GEAR PUMP
ELECTRONIC FOAM PROPORTIONING SYSTEM
Section
I
: Description
Ordering of Hale Foam systems is simple.
Using the current Hale FoamLogix Foam
System Price List and Order Form helps
ensure a complete matched system is
provided to the end user.
Use the following procedure when ordering
a Hale FoamLogix Foam system. Following
all the steps ensures a complete system will
be ordered:
1. Check Hale Foam system product
information update (Bulletin 961) for the
latest information and advice for foam
system selection.
2. Determine the type of foam
concentrate to be used in the system
and ensure system compatibility by
referring to the Hale Foam Concentrate
Compatibility list (Bulletin #650).
3. Determine the Hale Foam system
desired (Model 5.0 or Model 3.3; 12 VDC
or 24 VDC motor).
4. Determine tank selector desired based
on the number of foam concentrate
tanks installed (ADT or MDT
ΙΙ
for dual
tank systems; MST or No Selector for
single tank systems).
5. Determine strainers desired (In-line
Strainer/Valve Assembly, FS 15 Strainer
or FS 25 Strainer).
6. Determine the low tank level sensors
desired (Side Mount, Bottom Mount or
Top Mount Assembly).
7. Select the flowsensor then the mounting
weld fitting or saddle clamp based on
discharge pipe size. Select flowsensor
cable length (10 feet, 20 feet or 30 feet).
8. Determine additional Hale components
that enhance system operation and
ease installation (Control Cable
Extension, Waterway Check Valves,
Manifolds, Flanges, etc.).
Components shown in Bold type above
represent the best value performance
system. System components are shown in
the following system configuration section.
All components listed have been
engineered and tested with Hale Foam
systems to provide optimum system
performance. Using the information
provided in this manual section and the
detailed ordering procedures on the option
order form ensures a complete Hale Foam
system is ordered thus eliminating delays
caused by missing components.