Pem: position elevation mask, Function, Command format – Spectra Precision ProFlex 800 Reference Manual User Manual

Page 606: Response format

592

Query Command Library

etc.

The parameters returned by $PASHQ,PAR,OUT should be
interpreted as follows:

• “OFF” means the message is currently not output.

• “ON” means it is currently output with the default output

rate.

• A specified output rate means this rate has been user-set

through the appropriate command.

PEM: Position Elevation Mask

Function

This command is used to read the current value of the
elevation mask used in the position processing.

Command Format

Syntax

$PASHQ,PEM[*cc]

Response Format

Syntax

$PASHR,PEM,d1*cc