Spectra Precision ProFlex 800 Reference Manual - Manual (Page 345)

331
Set Command Library
Setting the License-Free Radio
Follow the instructions below. Each step should be executed
in the specified order:
1. Establish a connection with the receiver from FAST
Survey.
2. Select Equip>GPS Rover and then tap on the RTK tab
3. In the Device field, select “ARF7474..” corresponding to
the license-free radio used.
4. Tap on and complete the license-free radio settings.
5. Still on the RTK tab and in the same Device field, select
“Internal GSM”.
6. Tap on and and complete the GSM settings.
7. Tap to complete the receiver setting.
Activating RTC Bridge
• In FAST Survey, select Equip>GPS Utilities and then tap on
the Send Command button.
• In the combo box, type the following command, assuming
port E is the input port and port A the output port:
$PASHS,BRD,ON,0,E,A
• Tap on the Send button. The RTC Bridge function is
activated once the receiver has executed the command
and the $PASHR,ACK*3D line has been returned to FAST
Survey.
Port A
USB Port
To ProFlex 800
Radio+cable [P/N 802103 (US)]
[P/N 802104 (EU)]