Spectra Precision ProFlex 800 Reference Manual - Manual (Page 185)

171
Web Server Help Files Collection
Data format:
Tiltmeter The Tiltmeter page is used to set the conditions in which the
receiver will communicate with and get information from the
tiltmeter.
For each serial port (A, B, F), the following parameters can be
set to allow a connection to the tiltmeter:
Interval
Set the time interval, in seconds, used
by the receiver to query the meteoro-
logical unit, if connected to this port.
MET
Parameter Designation $PASHS
“Legacy D-File
Support” check
box Meteo data are part of the data saved in G-files.
If you check this option, they will also be saved
as separate D files (Ashtech legacy format).
RFT
Parameter Designation $PASHS
Parameter Designation $PASHS
Process tiltmeter
Enable this option to allow the
receiver to query the tiltmeter, if con-
nected to this port.
TLT
Baud Rate Set the port baud rate PRT
Mode
Set the port mode (RS232 or RS422).
Only port A can be RS422 or RS232.
All the others are necessarily RS232.
MDP
RTS/CTS
Enable or disable the handshaking
protocol on this port.
CTS