Spectra Precision ProFlex 800 Reference Manual - Manual (Page 490)

476
Set Command Library
– Carrier phase tracking is not stable (Bit 3 of MPC/MCA
warning is set).
– Pseudo-range data quality is bad (Bit 5 of MPC/MCA
warning is set).
– Polarity is not resolved (MPC/MCA Phase Tracking
Polarity flag is set to 0).
– The L1CA pseudo-range and computed range are in
agreement with each other.
– Elevation and azimuth angles are available and valid.
• The $PASHS,SOM,WRN command will mask only some
particular signal data (e.g. L1CA or L2P) corresponding to
a given satellite. If at the same time the L1CA data are
disabled, then ALL the satellite observations, and not only
those masked, will be rejected.
• The $PASHS,SOM,WRN command equally affects all
GNSS systems.
Examples
Setting WRN masks for both differential and raw data:
$PASHS,SOM,WRN,ON*6E
Enabling all signal observations to be output regardless of
whether some signals are flagged or not (no WRN mask):
$PASHS,SOM,WRN,OFF*20
Relevant Query
Command
$PASHQ,PAR
$PASHQ,SOM,WRN
See Also $PASHS,SOM
$PASHS,SOM,SNR
$PASHS,SOM,CTT
$PASHS,SOM,NAV
STI: Defining a Station ID
Function This command is used to define the station ID the base
receiver will broadcast in its differential messages to the
rover.