Spectra Precision ProFlex 800 Reference Manual - Manual (Page 539)

525
Query Command Library
Parameters
Example
The response line below indicates that the receiver is
configured as a base, uses the GPS and GLONASS
constellations, and the base has a static position:
$PASHQ,CPD,MOD
$PASHR,CPD,MOD,BAS,2,0,A*5A
Relevant Set
Command
$PASHS,CPD,MOD
See also $PASHQ,CPD
Parameter Description Range
s1
Current operating mode:
• BAS: Base
• ROV: Rover
• BKP: “Hot Standby RTK”, also called “Backup
mode” (rover computing two RTK positions)
BAS, ROV,
BKP
d2
Constellations currently used if the receiver is
defined as a base:
• 0: GPS, GLONASS, SBAS (default mode)
• 1: Only GPS and SBAS
• 2: Only GPS and GLONASS
• 3: Only GPS
0-3
d3
Position mode.
If BAS is the selected operating mode:
• 0: Static position
• 1: Moving position
If ROV is the selected operating mode:
• 0: means rover works with a static base
• 1: means rover works with a moving base
0-1
c4
Input port for backup mode:
• A, B, F: Serial ports
• C: Bluetooth port
• D: Radio
• E: Modem
• I, P, Q: Ethernet port
A, B, C, D,
E, F, I, P, Q
*cc Checksum *00-*FF