Spectra Precision ProFlex 800 Reference Manual - Manual (Page 105)

91
Using the Web Server
receives the expected data from the external GNSS
receiver through the selected input port).
On the Status bar, in the first column, you will now read
that the receiver is operating in “Rover/Heading” mode.
• Click on the Status tab and select Receiver Status and
Settings.
• Scroll down until you read the Heading data block.
Watching the Status field, you will see the receiver status
successively switch from “Float/Calibration” to “Fixed/
Calibration” then “Fixed/Operation”.
Further down on the page, the results of the heading
process will be given both in tabular and graphic form
once the calibration is complete and the status is “Fixed/
Operation”.
Creating an Account on Dyn.com
Dyn Standard DNS is an update mechanism, offered by
Dynamic Network Services, Inc., through which you can make
sure the hostname of your ProFlex 800 will always match the
dynamic IP address assigned to it by your Internet provider.
This however requires that you create an account and choose
the function you want to use.
Do the following to create an account:
• Open a new tab in your web browser.
• Type http://dyn.com/dns/ and press ENTER.
• Type on the Sign In button in the upper-right corner.
• Type on the “Create Account” link.