Spectra Precision ProFlex 800 Reference Manual - Manual (Page 214)

200
Web Server Help Files Collection
File:
Command Script The Command Script page is used to ask the receiver to run
a list of $PASH serial commands saved as an editable text
file.
This file can be found either in the local USB device
connected to the receiver, in which case it should be created
with the “cmd” extension, or on the computer running the
Web Server, in which case the selected file will first be
uploaded to the receiver before it can execute the commands.
USB Device:
Parameter Designation
Path
Path to the folder on the FTP server where an upgrade may
be posted.
File Name
With a connection to the default FTP server:
• A blank field means there is no upgrade available.
• The field automatically shows the name of the upgrade
file if there is one posted on the FTP server (filename in
the form “p_x00_upgrade_Vxxxxxxx.tar.bz2”).
With a connection to a different FTP server, this field will
always be blank until you type the name of the upgrade file,
which should be accessible through the specified path
above. The upgrade file may not have the same name as
the initial upgrade file released by
Spectra Precision but
should keep the same extension (“.tar.bz2”). If these
conditions are met, the upgrade is also possible through a
click on the Upload button.
Parameter Designation $PASHS
Command Files table
If there is no USB device connected to the
receiver, “USB not connected“ is reported
in this pane.
If a USB device is connected, this table
lists all the *.cmd files found in the root
directory.
-