Spectra Precision ProFlex 800 Reference Manual - Manual (Page 240)

226
ProFlex 800 CORS Station
• GSM module (modem) status [10]. This may be one of the
following icons:
• [11]: USB status and/or Bluetooth status and/or Ethernet
port status.
Memory Screens From the General Status screen, press the Scroll button to
access the Memory screens. Memory screens appear
successively (see examples) at a display rate of about five
seconds:
Left screen:
Icon Definition
Blank Modem turned off.
Blinking icon: Modem turned on but not initialized yet. Indicates
signal strength at modem antenna input.
Fixed icon: Modem turned on and initialized (ready for a connec-
tion). Indicates signal strength received at modem antenna input.
The higher the number of bars, the better the signal.
This icon will show four horizontal bars at the bottom when the
input signal is zero. The symbol shown in the upper-left corner
stands for “2G”. When the modem detects a 3G network, “3G” is
displayed instead.
Modem on line.
Icon Definition
USB port connected to active device
Bluetooth active
Ethernet port active
/
These two icons will appear successively when both the
USB port and Bluetooth are active.
/ /
These three icons will appear successively when the
USB port, the Ethernet port and Bluetooth are all active.
Blank USB port unconnected and Bluetooth inactive.
Blank USB port unconnected, Bluetooth and Ethernet inactive.