Spectra Precision ProFlex 800 Reference Manual - Manual (Page 424)

410
Set Command Library
Example
Tagging SBAS Differential position solutions in NMEA-like
and NMEA messages with code “9”:
$PASHS,NPT,1,1*3F
Relevant Query
Commands
$PASHQ,NPT
$PASHQ,PAR
NTR,LOD: Loading the NTRIP Caster Source Table
Function This command is used to load the source table from the
NTRIP caster.
Command Format Syntax
$PASHS,NTR,LOD[,c1][*cc]
Parameters
Example
Loading the source table:
$PASHS,NTR,LOD
If the source table is downloaded successfully, the following
response line will be returned:
$PASHR,NTR,OK*14
d2
Code assigned to SBAS differential position
solution in NMEA messages (GGA):
• 0: Code “2”
• 1: Code “9”
0, 1 0
*cc Optional checksum *00-*FF
Parameter Description Range Default
Parameter Description Range
c1
Internet port used to connect to the caster:
• E: Internal modem
• P: Ethernet stream 1
• Q: Ethernet stream 2
If c1 is omitted, the port used is the port defined through
the last $PASHS,NTR,PAR command run.
E, P, Q
*cc Optional checksum *00-*FF