Spectra Precision ProFlex 800 Reference Manual - Manual (Page 416)

402
Set Command Library
MET,INIT: Initialization String for Meteorological Unit
Function This command is used to define the character string that will
initialize the meteorological unit. The command also
specifies the ID of the receiver port used to communicate
with the meteorological unit.
The initializing string is in the form “*xxxxxx”. There is no
initialization string defined by default.
Command Format Syntax
$PASHS,MET,INIT,c1,s2[*cc]
Parameters
Example
Setting initialization string to “*9900ID”:
$PASHS,MET,INIT,A,9900ID*53
Relevant Query
Command
$PASHQ,MET
See Also $PASHS,MET,CMD
$PASHS,MET,INTVL
$PASHS,OUT,x,MET
Parameter Description Range
c1
Receiver serial port connected to the meteo-
rological unit.
A, B, F
s2
Initialization string (not including the leading
“*” character)
20 characters max.
*cc Optional checksum *00-*FF