Spectra Precision ProFlex 800 Reference Manual - Manual (Page 426)

412
Set Command Library
$PASHR,NTR,FAIL*12
Relevant Query
Command
None.
See also $PASHQ,NTR,TBL
NTR,PAR: NTRIP Settings
Function This command allows you to set all the NTRIP parameters.
Command Format Syntax
$PASHS,NTR,PAR[,ADD,s1][,PRT,d2][,LGN,s3][,PWD,s4][,TYP,d5][,IPP,c6
][*cc]
Parameters
Example
Entering NTRIP settings for a client caster by specifying its
IP address, port number, login and password:
$PASHS,NTR,PAR,ADD,192.34.76.1,PRT,2100,LGN,Ashtech,PWD,
u6huz8,TYP,0*52
Relevant Query
Commands
$PASHQ,NTR
$PASHQ,PAR
Parameter Description Range
ADD,s1
Caster IP address or host
name 000.000.000.000-255.255.255.255
or www.......
PRT,d2 Caster port number 0-65535
LGN,s3 Login 32 characters max.
PWD,s4 Password 32 characters max.
TYP,d5
Caster type:
• 0: Client
• 1: Server
0-1
IPP,c6
Internet port used on the
receiver to connect it to the
caster:
• E: Internal modem
(default)
• P: Ethernet stream 1
• Q: Ethernet stream 2
E, P, Q
*cc Optional checksum *00-*FF