Spectra Precision ProFlex 800 Reference Manual - Manual (Page 149)

135
Web Server Help Files Collection
Differential Streams
A receiver configured as a base can generate two
independent, differential data streams (1 and 2). This area
allows you to define these two streams. For each differential
stream, define the following parameters.
Ethernet Streaming
Use this area to configure the I1 to I9 ports of the receiver as
well as the type of data delivered through these ports. Each
Parameter Designation $PASHS
Port
Choose the port delivering the differential stream. The
possible choices are:
• D - Stream sent to internal radio via port D
• A - Serial: Stream available on port A.
• B - Serial: Stream available on port B.
• F - Serial: Stream available on port F.
• C - Bluetooth: Stream sent to external device
through Bluetooth.
• E - Modem: Stream forwarded to internal modem
• I - Ethernet: Stream available on the Ethernet port
through Direct IP connection (the base is a server)
• P - Ethernet: Stream available on the Ethernet port
through Direct IP or NTRIP connection. The base is
a client.
• Q - Ethernet: Stream available on the Ethernet port
through Direct IP or NTRIP connection. The base is
a client.
• M - Memory: Stream saved to internal memory.
• U - USB Device: Stream sent to external device via
the USB port.
BAS
Message
Choose the type of differential data delivered by the
port:
• None
• ATOM
• RTCM3.x
• RTCM2.3
• CMR
• CMR+
• DBEN
Place the mouse cursor over the ”I” sign (to the right
of the Message drop-down list) to read the details of
the currently set messages.
BAS