Spectra Precision ProFlex 800 Reference Manual - Manual (Page 594)

580
Query Command Library
MEM: Selected Memory Device
Function This command is used to query the memory device used by
the receiver.
Command Format Syntax
$PASHQ,MEM[*cc]
Response Format Syntax
$PASHR,MEM,d[*cc]
Parameters
Example
$PASHQ,MEM
$PASHR,MEM,0*2D
Relevant Set
Command
$PASHS,MEM
See also $PASHQ,FLS
MET: Meteorological Unit Settings
Function This command allows you to read the current settings on each
serial port allowing the receiver to query the meteorological
unit.
Command Format Syntax
$PASHQ,MET[*cc]
Response Format Syntax
In free form, as shown in the example below.
Parameter Description Range
d
Memory used:
• 0: Internal memory (NAND Flash) or extended
internal memory
• 2: USB mass storage key
0, 2
*cc Checksum *00-*FF