OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 48)

48 EN
Shooting
2
Subject Too Dark or Too Bright
If the camera is unable to achieve optimal exposure, the aperture display will flash as
shown.
Display Problem/solution
Low aperture value
2000 2000 F2.8 F2.8
Underexposure.
• Choose a slower shutter speed.
High aperture value
125 125 F22 F22
Overexposure.
• Choose a faster shutter speed. Shutter speeds as fast as
1/32000 s are available in silent mode.
• If the subject is still overexposed at the higher speed, the
limits of the camera metering system have been exceeded.
Use a third-party ND (Neutral Density) filter to reduce the
amount of light entering the camera.
%
When [
K
ISO] is not set to [Auto], optimal exposure may be achieved by changing the
setting.
g
“Changing ISO sensitivity (ISO)” (P. 113)
% The aperture value shown when the display flashes varies with the lens and focal length.