OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 212)

212 EN
Customizing the Camera
6
Role Function
Live ND Shooting
(ND)
( K only)
Enable the live ND filter (P. 158). Press once to enable [Live ND
Shooting]. Press again to disable. Hold the button and rotate the front
or rear dial to adjust [Live ND Shooting] settings.
Off
The control is not used.
Flash Mode (
#
)
( K only)
Adjust flash settings (P. 120). Press once to display flash options
and again select the highlighted option and exit. Highlight settings
using the front or rear dial or
HI
.
• This function can be assigned to the
I
and
G
buttons only. You
must first set [ d ] to [Direct Function].
j
/
Y
(sequential
shooting/self-
timer)
(
K
only)
Choose a drive (sequential shooting/self-timer) mode (P. 126).
Press the button to display drive mode options and then choose a
mode using the front or rear dial or the
HI
buttons.
• This function can be assigned to the
I
and
G
buttons only. You
must first set [ d ] to [Direct Function].
G
Lock (touch
control lock)
Lock touch controls. Press and hold the button once to lock touch
controls and again to unlock.
• This function can be assigned to the
I
and
G
buttons only. You
must first set [ d ] to [Direct Function].
Electronic Zoom
(
X )
Zoom power zoom lenses in or out. After pressing the control, use
the arrow pad to zoom in or out. Use
F
or
I
to zoom in and
G
or
H
to zoom out.
• This function can be assigned to the
I
and
G
buttons only. You
must first set [ d ] to [Direct Function].
AF Stop
Suspend autofocus. Focus locks and autofocus is suspended while
the control is pressed. Applies only to lens
l
buttons.
I
Face Selection
(
]
)
Select the face used for focus when the camera detects multiple
portrait subjects. Pressing the button selects the face closest to
the current AF target. If
o
All (all targets) is selected for AF-target
mode, pressing the button will instead select the face closest to the
center of the frame. To focus on a different face, hold the button
and rotate the front or rear dial. This option can also be used during
movie recording.
Face & Eye
Detection (
I
)
Pressing the button when an option other than [Off] is selected for
[Face & Eye Detection] (P. 88) selects [Off]; to restore the previous
setting, press the button again. To change the option displayed in the
[Face & Eye Detection] menu, hold the button and rotate the front or
rear dial.
Focus Ring Lock
(
B
)
Press the control once to disable, and again to enable, the lens focus
ring. This option is available when [S-AF
b ], [C-AF b ], [ b ],
[C-AF+TR b ], [Pre b ], or [
F
AF b ] is selected for [AF Mode].
The b portion of the AF mode indicator is displayed gray while the
ring is disabled.
In the case of lenses equipped with an MF (manual focus) clutch,
pressing the button has no effect when the focus ring is in the MF
position (closer to the camera body).
Focus ring lock ends when you perform an operation such as turning
the camera off or attaching a different lens.