OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 134)

134 EN
Shooting Settings
4
Button j Y#
button
n HI j
Super Control Panel
Q n
Drive
j
/
Y
Menu
MENU n _ n
7. Drive Mode
n
Drive
j
/
Y
1 Select ProCap, ProCap SH1, or ProCap SH2 and press the
Q
button.
2 Press the shutter button halfway to start capturing.
• When the shutter button is pressed halfway, a capture
icon ( ) will be displayed. If the button is kept pressed
halfway for over a minute, capture will end and the
icon will clear from the display. Press the shutter button
halfway again to resume shooting.
• Shooting will continue while the shutter button is
pressed all the way down, up to the number of shots
selected for [Frame Count Limiter].
1 1023 1023
P
1/ 250 P
1/ F 250 5.6 5.6
1 1 [1:02:03] [1:02:03] FF 60p 60p L-8 L-8
S-AF S-AF
33
L 1 4K
ISO
Auto
ISO
Auto F 00 + - 0.0 0.0
100 % 100 % r r O O
200 200
Capture icon
%
[Max fps], [Pre-shutter Frames], and [Frame Count Limiter] can be adjusted in
[Sequential Shooting Settings] (P. 128).
3 Press the shutter button all the way down to start saving pictures to the
memory card.
#
Pro Capture is not available while the camera is connected to a smartphone (Wi-Fi).
# Flickering occurred by fluorescent lights or the large movement of the subject, etc. may
cause distortions in images.
#
During capture, the monitor will not go dark and the sound of the shutter will not be heard.
#
The slowest shutter speed is limited.
#
Depending on subject brightness and the options selected for [ISO] and exposure
compensation, the display frame rate may drop below that selected for [Frame Rate]
(P. 225).