OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 231)

231 EN
Customizing the Camera
6
„ Configuring n Info Settings
1 Select an indicator you wish to display when the
INFO
button is pressed, and put a check ( v ) next
to it.
• Select an option using
FG
and press the
Q
button to
put a check ( v ) next to it. To remove the check, press
the
Q
button again.
MENU MENU OK
n Info Settings
Image Only
Information 1
Information 2
n
Info Settings setting
screen
Image Only No information will be displayed.
Information 1
Select an option using
FG
and press the
Q
button to put a check ( v )
next to it. To remove the check, press the
Q
button again.
To set the details of an item to be displayed, press
I
. The following
items can be set.
[
& ] / [Level Gauge] / [All Battery Information] / [Image Stabilizer] /
[Picture Mode ] / [WB] / [AF Mode] / [Face & Eye Detection] / [Sound
Recording Level Meter] / [Headphone Volume] / [Time Code] / [Silent
G Operation] / [Grid]
Information 2
%
The set that is currently in use cannot be disabled, but the items to be displayed can be
configured.
„ Choosing a Display
Press the
INFO
button during shooting to cycle through the selected displays.
g
“Switching the information display” (P. 38)
Configuring the display for when the shutter button is pressed
halfway (Info by half-pressing
a
)
PA S M B
n
You can configure the display for when the shutter button is pressed halfway.
Menu
MENU n G n
4. Information
n
Info by half-pressing
a
Off
No information is displayed while the shutter button is pressed halfway.
On1
Only the following exposure-related items are displayed while the shutter
button is pressed halfway.
• Shutter speed
• Aperture value
• Exposure compensation value
•
Difference from optimal exposure
• ISO sensitivity
On2
The display does not change even when the shutter button is pressed
halfway.